Informasjon
Thermal control for street, track, og motorsport - Type-A "Mini" Radiator Caps from Nuke Performance for 32mm radiator necks - 1.1 / 1.3 / 1.5 / 2.0 BAR.
Nuke Performance radiator caps are utviklet for demoging applications where cooling system stability is critical. Available in 1.1, 1.3, 1.5, og 2.0 BAR, each cap is precision-calibrated to maintain consistent system pressure og increase the boling margin of your coolant.
• Type-A "Mini" Radiator Caps, for 32mm radiator necks
• Fits all Nuke Performance Coolant Expansion Tanker
• Compatible with a wide range of OEM applications
• Rustfritt stål internals og body
• Silicon sealing is superior to OEM caps
By increasing system pressure, the coolant's boiling point rises, reducing the risk of localized boiling og maintaining heat transfer under load. Perfect match for the different available Coolant Expansion Tanker from Nuke Performance, as well as OEM replacement og custom installations.
• Available in different pressure ratings, ranging from 1.1 BAR to 2.0 BAR (16.0 PSI to 29.0 PSI). All with rustfritt stål internals og silicon sealing.
The Type-A Radiator Caps from Nuke Performance are manufactured from rustfritt stål for long-lasting performance og durability. The seal is made of silicon instead of natural rubber found in OEM radiator caps, ensuring a greater life span og durability.
The stated pressure rating represents the nominal release pressure og operates within a defined tolerance range. The illustration above shows the intended operating range for each Nuke Performance radiator cap.
Cooling system pressure directly affects the coolant boiling point. Always select the lowest pressure cap that provides sufficient boiling margin for your application, as higher pressure increases thermal stability but also places greater stress on system components.
Approximate boiling points :
| Radiator Cap Rating | Only Water | 50/50 Coolant / Water |
| 1.1 BAR (16.0 PSI) | ~121°C (~250°F) | ~129°C (~265°F) |
| 1.3 BAR (18.9 PSI) | ~124°C (~255°F) | ~131°C (~268°F) |
| 1.5 BAR (21.8 PSI) | ~127°C (~261°F) | ~135°C (~275°F) |
| 2.0 BAR (29.0 PSI) | ~134°C (~273°F) | ~142°C (~288°F) |
* Approximate values. Actual boiling point varies with coolant formulation og system conditions. Cap ratings are gauge pressure.
Higher pressure raises the boiling point, reduces the risk of localized vapor formation, og improves thermal stability under high load. However, increased pressure also places greater stress on slanger, radiator, expansion tank, og seals. Available in several different pressure ratings, make sure to select the preferred one ved bestilling.
Type-A Radiator Cap, 1.1 BAR (16.0 PSI) Art.nr. : 452-01-011
Type-A Radiator Cap, 1.3 BAR (18.9 PSI) Art.nr. : 452-01-013
Type-A Radiator Cap, 1.5 BAR (21.8 PSI) Art.nr. : 452-01-015
Type-A Radiator Cap, 2.0 BAR (29.0 PSI) Art.nr. : 452-01-020
• Why radiator cap pressure og boiling point matter in high-performance engines.
In high-performance og turbocharged engines, the cooling system is exposed to extreme cylinder pressures, elevated exhaust gas temperatures, og sustained thermal load. Even when the average coolant temperature appears stable, localized hotspots inside the cylinder head can reach significantly higher temperatures.
When coolant reaches its local boiling point, micro-boiling occurs. Vapor pockets drastically reduce heat transfer efficiency, increase metal temperatures, og raise the risk of detonation, pre-ignition, og head gasket stress. Liquid coolant transfers heat efficiently — vapor does not.
Selecting a properly rated radiator cap increases system pressure, raises the coolant boiling point, og stabilizes cooling performance under high load. Nuke Performance Type-A radiator caps are engineered for precise pressure control og reliable operation in performance street builds og demoging motorsport environments.
• Nuke Performance Type-A Radiator Caps Specifications:
For mer informasjon om spesifikasjoner, ta direkte kontakt.
| Available ratings | 1.10 / 1.30 / 1.50 / 2.00 BAR16.0 / 18.9 / 21.8 / 29.0 PSI |
| Art.nr. 452-01-011 | |
| - Rated release pressure | 1.1 BAR (16.0 PSI) |
| - Verified opening range | 1.05 - 1.20 BAR (15.23 - 17.40 PSI) |
| Art.nr. 452-01-013 | |
| - Rated release pressure | 1.3 BAR (18.9 PSI) |
| - Verified opening range | 1.25 - 1.40 BAR (18.10 - 20.30 PSI) |
| Art.nr. 452-01-015 | |
| - Rated release pressure | 1.5 BAR (21.8 PSI) |
| - Verified opening range | 1.45 - 1.60 BAR (21.03 - 23.10 PSI) |
| Art.nr. 452-01-020 | |
| - Rated release pressure | 2.0 BAR (29.0 PSI) |
| - Verified opening range | 1.90 - 2.10 BAR (27.55 - 30.45 PSI) |
| Radiator neck type | 32mm radiator neck (Type-A seal) |
| Material ventil / cap | Rustfritt stål |
| Material seal | Silicon |
| Ventil diameter | 29.2mm (1.15") |
| Cap diameter min. / max. | 45.5mm (1.79”) / 65.0mm (2.56”) |
| Høyde ventil | 25.4mm (1.00") |
| Høyde overall | 27.0mm (1.06") |
| Vekt | 38.5g (1.35oz) |
| For motorsportbruk | JA |
• Nuke Performance Type-A Radiator Caps fitment guide:
Fits all Nuke Performance Coolant expansion tanker, og widely used in Japanese performance engine platforms, including:
| Honda | B-, K-, og H-series |
| Nissan | SR, RB, og VR engines |
| Toyota | Celica, MR2, 1JZ og 2JZ engines |
| Subaru | EJ engines |
| Mazda | Rotary engines, og MX-5 |
| Mitsubishi | 4G63 engines |
Also kompatibel med select European vehicles og motorsport builds utstyrt med a Type-A (32mm) radiator neck. Always verify radiator neck specification before installation.
Gjenger / Tilkobling: Type-A
Produsent
Nuke Performance
Nuke Performance er en svensk produsent av motorsportdeler i høykvalitets aluminium, kjent for bensinsystemer, catchtanker, fuel rails og ventilhus til trimmende motorer.