Hopp til innhold

Frakt 99,- | Rask levering

-10% Ny

Ekspansjonstank for kjølevæske, 1.5L

3.285,-

3.650,-

- 10%
Førpris 3.650,-
Førprisen er den laveste prisen vi har anvendt i minimum 30 dager før prisen ble markedsført som nedsatt
7-10 dager leveringstid
Rask levering
Fast fraktpris
Kvalitetsprodukter
Art.nr: 455-01-202
Få beskjed når varen er på lager!

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

The Nuke Performance Coolant Expansion Tank, 1.5L, has a simplified single-chamber design for reliable cooling system performance.

The Coolant Expansion Tank, 1.5L, from Nuke Performance is konstruert for both street og motorsport applications, where dependable performance, durability, og ease of installation are key.

• Lightvekt single-chamber aluminium coolant tank
• Type-A radiator cap compatibility
• Available both with 1.0L og 1.5L capacities
• AN-8 ORB inlet og AN-10 ORB outlet
• Built for consistent performance under heat og pressure

The single-chamber expansion tank offers a robust og lightvekt solution for pressurized cooling systems. Designed to hogle demoging conditions while maintaining stable coolant flow, it delivers long-term reliability across a wide range of applications, both on the street og in motorsport.

• Simplified single-chamber coolant expansion tank with controller vortex inlet flow.
Designed around a straightforward single-chamber layout, this expansion tank provides reliable coolant management for a wide range of applications. Incoming coolant enters through the side-mounted AN-8 ORB inlet, creating a controlled swirling motion that supports consistent circulation og natural air separation within the tank.

• Single-chamber 1.5L internal design
• Designed for use in pressurized cooling systems
• Controlled vortex inlet flow

Engineered to function as an integrated part of the pressurized cooling system, not as an overflow tank. The simplified internal construction ensures stable coolant movement og predictable system behavior, while the Nuke Performance 0.8L Performance utførelse (tilgjengelig her) offers the next level of engineering for more advanced requirements.

• AN-8 ORB inlet port og single AN-10 ORB outlet port enable a wide range of kobling options with our selection of koblinger og adaptere.
An AN-8 ORB port located in the upper section serves as the inlet for incoming hot coolant. Its side-mounted position introduces the coolant into the tank with a controller swirl, supporting consistent circulation og natural air separation. We offer a wide range of AN koblinger (tilgjengelig her) og adaptere to suit your installation.

• AN-8 ORB inlet with side-mounted entry for controlled flow
• AN-10 ORB main outlet at the bottom of the tank
• Straightforward configuration for easy installation

A single AN-10 ORB outlet is integrated at the bottom of the tank, serving as the main coolant outlet. Its position supports stable coolant circulation within the pressurized system, making it a reliable og efficient solution for both street og motorsport applications.
AN-8 ORB assortment : Available here
AN-10 ORB assortment : Available here

• Type-A Radiator cap compatibility, increasing system pressure og operating temperatures for high-performance og motorsport applications.
The coolant tank uses a 32mm radiator neck, konstruert for å use standard "mini" Type-A radiator caps. Upgrading to the Nuke Performance expansion tank allows the use of higher-rated Type-A caps (tilgjengelig her), increasing system pressure og operating temperatures for high-performance og motorsport applications.

The stated pressure rating represents the nominal release pressure og operates within a defined tolerance range. The illustration above shows the intended operating range for each Nuke Performance radiator cap.

Cooling system pressure directly affects the coolant boiling point. Always select the lowest pressure cap that provides sufficient boiling margin for your application, as higher pressure increases thermal stability but also places greater stress on system components.
Type-A Radiator Cap, 1.1 BAR (16.0 PSI) Art.nr. : 452-01-011
Type-A Radiator Cap, 1.3 BAR (18.9 PSI) Art.nr. : 452-01-013
Type-A Radiator Cap, 1.5 BAR (21.8 PSI) Art.nr. : 452-01-015
Type-A Radiator Cap, 2.0 BAR (29.0 PSI) Art.nr. : 452-01-020

• Designed og developed in Sweden, with no compromises in engineering, materials, or performance.
Engineered entirely in-house by Nuke Performance, the Coolant Expansion Tank range in 1.0L og 1.5L offers a reliable og well-balanced solution for pressurized cooling systems. With a straightforward single-chamber design, controlled inlet flow, og durable welded construction, it delivers consistent performance og long-term durability across a wide range of applications. Developed with the same focus on function, fit, og reliability that defines every Nuke Performance product, these expansion tanker are built to perform in both street og motorsport environments.

Det finnes ingen erstatning for kvaliteten til Nuke Performance.

• Coolant Expansion Tank, 1.5L Specifications:
For mer informasjon om spesifikasjoner, se produktmanualen.

Expansion tank capacity1.5 liter (0.40 gal)
Radiator cap connection32mm radiator neck, Type-A (not inkludert)
Inlet port gjengerAN-8 ORB (se utvalg)
Outlet port gjengerAN-10 ORB (se utvalg)
Overflow port gjenger1/16 NPT (1/16 NPT to 6mm Barb inkludert)
Reservoir designSingle chamber design
Pressure compatibility0.00 - 2.50 BAR (0.00 - 36.25 PSI)
Coolant level readingNEI
Bredde (with brakett)119.0mm (4.68")
Bredde (without brakett)100.0mm (3.94")
Høyde (to top of cap flange)239.2mm (9.42")
Dybde (with brakett)119.5mm (4.70")
Vekt616g (1.35lb)
For motorsportbrukJA, only for motorsportbruk
Art.nr.455-01-202
EAN7340209511208

• Last ned produktmanual (.pdf)
• Accessories / Reserve parts


• Coolant Expansion Tank, 1.5L includes:
1 x Coolant expansion tank, 1.5L capacity
1 x 1/16 NPT Barb kobling to 6mm slange
1 x Integrated aluminium monteringsbrakett

Gjenger / Tilkobling: Inlet AN-8, Outlet AN-10

Produsent

Nuke Performance er en svensk produsent av motorsportdeler i høykvalitets aluminium, kjent for bensinsystemer, catchtanker, fuel rails og ventilhus til trimmende motorer.

Vi leverer motorer og topplokk til sjåfører som konkurrerer om NM-medaljer i rallycross.