Hopp til innhold

Frakt 99,- | Rask levering

-10% Ny

CFC Unit Stäubli connector, dual AN-12

1.187,-

1.319,-

- 10%
Førpris 1.319,-
Førprisen er den laveste prisen vi har anvendt i minimum 30 dager før prisen ble markedsført som nedsatt
7-10 dager leveringstid
Rask levering
Fast fraktpris
Kvalitetsprodukter
Art.nr: 150-25-001
Få beskjed når varen er på lager!

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

CFC Unit Stäubli connector, dual AN-12, adapts your CFC Unit filler neck to work with the Stäubli quick fill options.

This adapter replaces the stock filler neck attachment of the Nuke Performance CFC Units (tilgjengelig her) og gives you a dual setup of AN-12 porter. It is developed to work with the Stäubli quick fill options. The adapter is easily mounted to the CFC Unit top lid with the inkludert hardware og Viton gasket.

• Connect dual AN-12 Stäubli connectors to the CFC Units
• It replaces the stock filler neck assembly of the CFC Unit
• Godkjent for alle typer drivstoff, inkludert alkoholbasert drivstoff

It seals to the used koblinger either with the internal AN flange used on Stäubli quick-connect adaptere or an ORB O-ring seal if you want to mount AN-12 ORB koblinger (tilgjengelig her) to either of the two available porter. The additional port can also be plugged off with an AN-12 ORB Plugg (tilgjengelig her) if needed.

How to install the Stäubli connector to the CFC Unit?
The CFC Unit Stäubli connector, dual AN-12, replaces the stock filler neck assembly by removing the five M6 bolts that secure the filler neck to the top lid of the CFC. To access these bolts, remove the CFC unit from the fuel cell og reach them from the underside of the top lid. Position the Stäubli connector with its Viton gasket between the connector og the top lid, og secure it using the five inkludert M6 bolts.

This machined aluminium adapter is selges separat as an accessory og is not leveres med any Nuke Performance CFC Units. No Stäubli connectors is inkludert with the connector, these has to be purchased individually og is not provided by Nuke Performance.

• Nuke Performance CFC Unit Stäubli connector, dual AN-12 Specifications:
For mer informasjon om spesifikasjoner, ta direkte kontakt.

Port gjenger2x AN-12 (1-1/16-12 UNF)
Works withNuke Performance CFC Units
Bredde / Dybde80.7mm (3.18") / 60mm (2.36")
Høyde over top lid34mm (1.34")
CTC porter47.3mm (1.86")
Vekt143g (5.04oz)
For motorsportbrukJA
DrivstoffkompatibilitetBensin, etanol, E85, E100, metanol
Art.nr.150-25-001
EAN7340209504798

• Nuke Performance CFC Unit Stäubli connector, dual AN-12 includes:
1 x Machined aluminium Stäubli connection adapter
1 x Viton gasket
5 x MF6S M5x20

Gjenger / Tilkobling: AN12

Produsent

Nuke Performance er en svensk produsent av motorsportdeler i høykvalitets aluminium, kjent for bensinsystemer, catchtanker, fuel rails og ventilhus til trimmende motorer.

Vi leverer motorer og topplokk til sjåfører som konkurrerer om NM-medaljer i rallycross.