Hopp til innhold

Frakt 99,- | Rask levering

-10% Ny

Full Flow Flex Fuel-sensor (etanolsensor) Adapter

2.334,-

2.594,-

- 10%
Førpris 2.594,-
Førprisen er den laveste prisen vi har anvendt i minimum 30 dager før prisen ble markedsført som nedsatt
7-10 dager leveringstid
Rask levering
Fast fraktpris
Kvalitetsprodukter
Art.nr: 310-03-201
Få beskjed når varen er på lager!

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Nuke Performance Full Flow Flex Fuel Sensor Adapter. Bypass design lets you use an ethanol content sensor without flow loss.

With the Nuke Performance bypass Full Flow Flex Fuel Sensor Adapter, you can mount your ethanol content sensor on both the pressure og return drivstoffledning in your drivstoffsystem. A sensor is not inkludert with delivery.

• Fits most common GM flex-fuel sensorer
• Bypass design exceeds AN-10 drivstoffledning capacity
• AN-10 ORB inlet/outlet for maximum drivstoffgjennomstrømning
• Works on both pressure og return drivstoffledninger
• Lightvekt design, with an integrated brakett
• 4 x Viton O-ringer for long-term durability

When running alcoholic fuels som E85, an ethanol content sensor is used to measure fuel at all times in order to maintain the accuracy og performance of the ECU. The most commonly used sensorer have a very small flow capacity which doesn´t support a high-performing fuel setup. With this sensor adapter, you can put the sensor on both the pressure og return side with close to no flow loss, thanks to its bypass design which surpasses the capability of a dash 10 drivstoffledning.

• Fits all of the most common OEM ethanol content sensorer for your aftermarket drivstoffsystem.
Designed to work with the most common flex-fuel sensorer on the market from OEM manufacturer GM (Continental), this adapter works with 13577379, 13577429, SE1003, 13577394, og other sensorer of the same design. Many of the stogalone ECU manufacturers, som Haltec, Cobb Tuning, Fuel Tech USA, ECU Master, AEM, Link, og MaxxECU, sell sensorer with their own broging. However, these normally have the same spesifikasjoner as the OEM parts og work with the Nuke Performance sensor adaptor as long as they use 9.49 (5/16") connections.

• Designed with a bypass design that exceeds an AN10 drivstoffledning capacity, oversized components give you headroom where you need it.
The oversized internal bypass drivstoffledning integrated within the Nuke Performance Full Flow Flex Fuel Sensor Adapter exceeds a AN-10 drivstoffledning capacity. The oversized internal gives you headroom where you need it og makes it possible to mount the sensor on either the pressure or return side of your drivstoffsystem.

• Which flex fuel sensor can be used with the Nuke Performance bypass ethanol content sensor adapter?
The Nuke Performance split-flow sensor adapter has been developed to be used together with all the commonly used flex fuel content sensorer som Continental (GM) 13577429, 2022400116, 13577379, SE1003, og even the 13577394, which needs to be modified to a bredde of 95mm (3.75").

• GM 13577429 flex fuel sensor
• GM 13577379 flex fuel sensor
• GM13577394 flex fuel sensor

The full flow flex fuel sensor adapter is leveres medout the needed flex fuel sensor.
GM Flex Fuel Sensor 13577429 Art.nr. : 70-13577429

• Uses over-dimensioned AN-10 ORB drivstoffledning koblinger for maximum flow with close to no flow loss even with høy gjennomstrømning fuel setups.
Overdimensioned AN-10 inlet/outlet gjenger allow for the highest possible drivstoffgjennomstrømning capacity. The AN-10 ORB koblinger have the highest possible flow og leveres i a large variety of sizes. Additional AN-10 ORB to AN-6, AN-8, AN-10, og AN-12 koblinger are selges separat as accessories.
AN-10 ORB to AN-6 Hann Art.nr. : 700-01-108
AN-10 ORB to AN-8 Hann Art.nr. : 700-01-109
AN-10 ORB to AN-10 Hann Art.nr. : 700-01-110
AN-10 ORB to AN-12 Hann Art.nr. : 700-01-111
AN-10 ORB to AN-10 Hunn Art.nr. : 700-04-121
AN-10 ORB to 8mm Barb Hann Art.nr. : 700-04-124

• Delivered with a lightvekt brakett for an easy mounting solution for the GM 13577429 flex fuel sensor.
One of the most common ethanol content sensorer, the GM 13577429, lacks mounting points as stock. With the Nuke Performance Full Flow Flex Fuel Sensor Adapter, you will both receive all the benefits of a split-flow design. At the same time, integrated braketter provide a safe og durable installation, particularly helpful alongside the often demoging conditions within motorsport. For the GM 13577379 og 13577394, which have their own mounting holes, you do not need to use the provided monteringsbrakett.

• Developed og konstruert for both enthusiasts og professional motorsport athletes by Nuke Performance in Sweden.
The Nuke Performance full flow flex fuel sensor adapter, AN-10 is developed og designed in-house by Nuke Performance in Sweden for the highest possible quality with the same hallmark as all the other parts in our lightvekt motorsport range. Det finnes ingen erstatning for kvaliteten til Nuke Performance!

• Full Flow Flex Fuel Sensor Adapter, AN-10 Specifications:
For mer informasjon om spesifikasjoner, ta direkte kontakt.

Fits sensorerSE1003, 13577379, 13577429, 13577394*
InnløpsgjengerAN-10 ORB, se utvalg here
UtløpsgjengerAN-10 ORB, se utvalg here
Bypass designJA, total internals exceeds AN-10 drivstoffledning
DrivstoffkompatibilitetGasoline, Petrol, Methanol, Ethanol
Integrated brakettJA, removable when not needed
Høyde44.2mm (1.74") / 56.2mm (2.21") **
Bredde137mm (5.39")
Dybde32mm (1.26") / 42.5mm (1.67") **
Brakett CC48mm (1.89")
Vekt240g (8.46oz)
Sensor connectionSAE 9.49 (5/16")
Sensor max bredde95mm (3.75")

* Sensor 13577394 needs modification before application
** First measurement is without the brakett, second measurement is with the brakett

• Nuke Performance Full Flow Flex Fuel Sensor Adapter Includes:
1 x Full Flow Flex Fuel Sensor Adapter
1 x Lightvekt brakett, removable when not needed
1 x Safety leaflet

• Last ned produktblad (.pdf)
• Ethanol Content Sensorer

Gjenger / Tilkobling: AN10 ORB

Produsent

Nuke Performance er en svensk produsent av motorsportdeler i høykvalitets aluminium, kjent for bensinsystemer, catchtanker, fuel rails og ventilhus til trimmende motorer.

Vi leverer motorer og topplokk til sjåfører som konkurrerer om NM-medaljer i rallycross.